Panasonic SC-NE5 Manuale Utente

VQT4X66

23

Before requesting service, make the following 
checks. If you are in doubt about some of the check 
points, or if the solutions indicated in the following 
guide do not solve the problem, consult your dealer 
for instructions.

≥ Occasionally, Panasonic may release updated software for 

this system that may add or improve the way a feature 
operates. (l 21)

The CD unit and the speaker unit are not 
wirelessly connected.
The sound is interrupted.
The standby/on indicator on the side of the CD 
unit lights red.
The display shows “NOCONNECT” or 
“CANNOT ACCEPT”.
This system has a wireless communication 
problem, follow the instructions below.
1 Check that the AC mains leads are connected 

to the both units.

2 If the devices which use 2.4 GHz are being 

used near this system, turn them off 
temporarily.

3 Move the both units closer together.

A wireless connection will be automatically 
established.

≥ If a wireless connection is not established, set the 

communication mode to “C.MODE1”. (l 22)

≥ If the problem persists, connect the units with 

cables. (l 8)

≥ Press any button on the CD unit, or select “CD”, 

“IPOD_DOCK”, or “IPOD_PORT” as an audio source.

≥ An AC mains lead or fluorescent light is near the cords. Keep 

other appliances and cords away from this system’s cables.

≥ You may not be able to play MP3 if you have copied a 

multi-session disc that has no data between sessions.

≥ When creating a multi-session disc, it is necessary to close 

the session.

≥ The amount of data on the disc is too small. Set the amount 

of data to above 5 MB.

≥ Check the Bluetooth

®

 device condition.

≥ The pairing of the device was unsuccessful or the registration 

has been replaced. Try pairing the device again.

≥ This system might be connected to a different device. 

Disconnect the other device and try pairing the device again.

≥ For some built-in Bluetooth

®

 devices, you have to set the 

audio output to “SC-NE5” manually. Read the operating 
instructions for the device for details.

≥ The device is out of the 10 m communication range. Bring 

the Bluetooth

®

 device closer to this system.

≥ Remove any obstacle between this system and the device.
≥ Other devices that use the 2.4 GHz frequency band (wireless 

router, microwaves, cordless phones, etc.) are interfering. 
Bring the Bluetooth

®

 device closer to the speaker unit and 

distance it from the other devices.

≥ Select “MODE 1” for stable communication. (

l 16).

≥ Make sure that the disc is compatible with this system. (

l 5)

≥ There is moisture on the lens. Wait for about an hour and 

then try again.

No response when [1/;] is pressed.

≥ Disconnect the USB device and then reconnect it. 

Alternatively, turn this system off and on again.

≥ The USB drive format or its contents is/are not compatible 

with this system (l 5).

≥ The USB host function of this product may not work with 

some USB devices.

≥ Large file size or high memory USB flash drive takes longer 

time to read.

≥ Copy the data to another USB device or backup the data and 

reformat the USB device.

To return all settings to the factory preset
When the following situations occur, reset the 
memory of both the CD unit and the speaker unit:

≥ There is no response when buttons are pressed.
≥ You want to clear and reset the memory contents.

1 Disconnect the AC mains lead. (Wait for at 

least 3 minutes before proceeding to step 2.)

2 While pressing and holding down [

Í/I] on the 

unit, reconnect the AC mains lead.
≥ Keep holding down [Í/I] until “--------” 

appears on the display.

3 Release [

Í/I].

All the settings are returned to the factory preset. You will 
need to reset the memory items.

SC-NE5GS~VQT4X66.book  23 ページ  ２０１３年３月２５日　月曜日　午後３時４０分