Panasonic PT-DZ16KU Manuale Utente
Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 105
3) Press as to select [(IN) BAUDRATE].
4) Press qw to switch the item.
4) Press qw to switch the item.
f
The items will switch each time you press the button.
[9600]
Select the proper speed.
[19200]
[38400]
[38400]
5) Press as to select [(IN) PARITY].
6) Press qw to switch the item.
6) Press qw to switch the item.
f
The items will switch each time you press the button.
[NONE]
Select the parity condition.
[EVEN]
[ODD]
Setting the communication condition of the <SERIAL OUT> terminal
1) Press as to select [RS‑232C].
2) Press the <ENTER> button.
2) Press the <ENTER> button.
f
The
[RS‑232C] screen is displayed.
3) Press as to select [(OUT) BAUDRATE].
4) Press qw to switch the item.
4) Press qw to switch the item.
[9600]
Select the proper speed.
[19200]
[38400]
[38400]
5) Press as to select [(OUT) PARITY].
6) Press qw to switch the item.
6) Press qw to switch the item.
f
The items will switch each time you press the button.
[NONE]
Select the parity condition.
[EVEN]
[ODD]
Setting the response
1) Press as to select [RS‑232C].
2) Press the <ENTER> button.
2) Press the <ENTER> button.
f
The
[RS‑232C] screen is displayed.
3) Press as to select [RESPONSE(ID ALL)].
4) Press qw to switch the item.
4) Press qw to switch the item.
[ON]
Returns the response when the ID setting is ALL.
[OFF]
Does not return the response when the ID setting is ALL.
5) Press as to select [GROUP].
6) Press qw to switch the item.
6) Press qw to switch the item.
[A] - [Z]
Controls multiple projectors simultaneously by sending the ID of RS-232C. You can set groups from
[A] to [Z]. The projector responds when the ID of RS-232C matches the setting.
7) Press as to select [RESPONSE(ID GROUP)].