Panasonic PT-DZ16KU Manuale Utente
Chapter 4 Settings — [DISPLAY OPTION] menu
88 - ENGLISH
Setting [SIGNAL LEVEL]
Select the amplitude of the signal to input.
1) Press as to select [SDI IN].
2) Press the <ENTER> button.
2) Press the <ENTER> button.
f
The
[SDI IN] screen is displayed.
3) Press as to select [SIGNAL LEVEL].
4) Press qw to switch the item.
4) Press qw to switch the item.
[64‑940]
Normally use this setting.
[4‑1019]
Select when gray is displayed as black.
Setting [BIT DEPTH]
1) Press as to select [SDI IN].
2) Press the <ENTER> button.
2) Press the <ENTER> button.
f
The
[SDI IN] screen is displayed.
3) Press as to select [BIT DEPTH].
4) Press qw to switch the item.
4) Press qw to switch the item.
[AUTO]
Automatically select [12-bit] or [10-bit].
[12‑bit]
Fixes to [12-bit].
[10‑bit]
Fixes to [10-bit].
Setting [3G-SDI MAPPING]
1) Press as to select [SDI IN].
2) Press the <ENTER> button.
2) Press the <ENTER> button.
f
The
[SDI IN] screen is displayed.
3) Press as to select [3G-SDI MAPPING].
4) Press qw to switch the item.
4) Press qw to switch the item.
[AUTO]
Automatically select [LEVEL A] or [LEVEL B].
[LEVEL A]
Fixes to [LEVEL A].
[LEVEL B]
Fixes to [LEVEL B].
Note
f
Does not operate during SD-SDI or HD-SDI input.