Panasonic SCHT56 Manuale Utente
4
RQTX0175
The remote control/Control guide
3
2
2
1
R6/LR6, AA
g
Batteries
Insert so the poles (+ and –) match those in the remote
control.
Do not use rechargeable type batteries.
Do not heat or expose to flame.
Do not leave the batteries in an automobile exposed to direct
sunlight for a long period of time with doors and windows
closed.
control.
Do not use rechargeable type batteries.
Do not heat or expose to flame.
Do not leave the batteries in an automobile exposed to direct
sunlight for a long period of time with doors and windows
closed.
•
•
•
•
•
•
Keep the transmission window and the unit's sensor free from
dust.
Operation can be affected by strong light sources, such as
direct sunlight, and the glass doors on cabinets.
dust.
Operation can be affected by strong light sources, such as
direct sunlight, and the glass doors on cabinets.
•
•
Use
Aim at the sensor, avoiding obstacles, at a maximum range of
7 m (23 feet) directly in front of the unit.
7 m (23 feet) directly in front of the unit.
Remote control signal sensor
7 meters (23 feet)
Transmission window
Note
The remote control
Control guide
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type
recommended by the manufacturer.
Dispose of used batteries according to the manufacturer’s
instructions.
Replace only with the same or equivalent type
recommended by the manufacturer.
Dispose of used batteries according to the manufacturer’s
instructions.
This page describes the buttons used to control this unit.
See the guide at pages 20 and 21 for the buttons that control other units.
See the guide at pages 20 and 21 for the buttons that control other units.
1
2
3
5
6
7
8
9
10
[^]
Standby/on button.
Standby/on button.
1
7
8
9
10
3
[1, 2, 3, 4, 5, 6, 7, 8, 9, 0]
To enter radio frequencies and
To enter radio frequencies and
channels.
[ ≧10]
To enter two digit channels.
[ ≧10]
To enter two digit channels.
2
[TUNER,
―BAND]
For switching the remote control to
TUNER mode and selecting TUNER.
After selecting TUNER, press and hold
to switch between FM and AM.
TUNER mode and selecting TUNER.
After selecting TUNER, press and hold
to switch between FM and AM.
5
[u, 2, i, 1, SKIP]
For selecting preset radio channels.
For selecting preset radio channels.
6
[-EFFECT,
―C.FOCUS]
Use when adjusting Dolby Pro Logic
ΙΙ
effects.
Press and hold to select center focus
mode.
[-, +]
First select [-EFFECT] or [-LEVEL,
—TEST], then press [-] or [+] to adjust.
Press and hold to select center focus
mode.
[-, +]
First select [-EFFECT] or [-LEVEL,
—TEST], then press [-] or [+] to adjust.
[-LEVEL,
―TEST]
Use when adjusting speaker level.
Press and hold to start the speaker test
signal.
Press and hold to start the speaker test
signal.
[TV] [BD/DVR,
―DVD-P]
Input mode and remote control mode
buttons.
[+, -, VOL]
To adjust the volume.
[MUTING]
To mute the volume.
[TUNER DIRECT TUNING]
To enable selection of radio stations by
frequency.
[OFF]
To cancel Dolby Pro Logic
ΙΙ
and SFC.
[
PL ]
For selecting a Dolby Pro Logic
ΙΙ mode:
MOVIE, MUSIC or PANORAMA.
[MUSIC]
For selecting SFC modes:
LIVE, POP/ROCK, VOCAL, JAZZ,
DANCE or PARTY.
[MOVIE]
For selecting SFC modes:
DRAMA, ACTION, SPORTS, MUSICAL,
GAME or MONO.
4
4
[-AUTO SETUP]
For auto speaker setup.
For auto speaker setup.
Remote control
SC-HT56P_MP (RQTX0175-2P).indb 4
9/19/2008 12:27:55 PM