Panasonic PT-DW730UL Manuale Utente

■Do not use the projector tilted right or left.

Using the projector at a vertical angle that exceeds 15° may reduce product life or result in malfunction.

■When installing and using the projector at an angle that exceeds 30° 



Failure to observe this will result in malfunctions or the lamp life or other components will be shortened.

■Cautions when setting the projectors

 

z

When installing and using the projector with a method other than the floor standing installation using the 

adjustable feet, fix the projector using the five screw holes for ceiling mounting (shown in the figure). 

(Screw diameter: M6, tapping depth inside the set: 12 mm)

 

z

Use the adjustable feet only for the floor standing installation and for adjusting the angle. If you use it other 

than this purpose, the set may be damaged.

Screw holes for ceiling mount (M6)

Adjustable feet

 

z

Do not stack the projectors.

 

z

Do not use the projector tilted at an angle 

that exceeds ±15° vertically.

 

z

Do not block the ventilation ports (intake 

and exhaust) of the projector.

 

z

Avoid heating and cooling air from the air 

conditioning system directly blow to the 

ventilation ports (intake and exhaust) of the 

projector.

+15°
–15°

over 500 mm (20")

over 500 mm (20")

over 500 mm (20")

over 100 mm (4")

 

z

Do not install the projector in a confined space. 

When it is necessary to install in a confined space, install the air conditioning or ventilating installation 

separately. Exhaust heat may accumulate when the ventilation is not enough, triggering the protection 

circuit of the projector.

 

z

Make a clearance of at least 20 mm between the projector bottom and setting surface by inserting spacers 

(metallic) etc. between them.