Panasonic PT-DZ16KE Manuale Utente

Chapter 4 Settings — [PROJECTOR SETUP] menu

ENGLISH - 111

Load the various setting values saved as a backup in the built-in memory of the projector.

1)  Press as to select [LOAD ALL USER DATA].
2)  Press the <ENTER> button.

 

f

The 

[SECURITY PASSWORD] screen is displayed.

3)  Enter a security password and press the <ENTER> button.
4)  When the confirmation screen is displayed, press qw to select [OK], and press the <ENTER> button.

 

f

The projector enters the standby mode to reflect the setting values when [LOAD ALL USER DATA] is executed.

 

f

Data registered from a computer is not included in [ALL USER DATA].

Return various setting values to their factory default settings.

1)  Press as to select [INITIALIZE].
2)  Press the <ENTER> button.

 

f

The 

[SECURITY PASSWORD] screen is displayed.

 

f

The 

[INITIALIZE] screen is displayed.

4)  Press as to select an item to initialize.

Returns all setting values including [ENTRY SIGNAL], [NETWORK SETUP], [E-mail set up], and 

[USER LOGO] to the factory default settings.

The projector enters the standby mode to reflect the setting values.

Deletes all the setting values saved for each input signal.

To delete only a part of a registered signal, perform the procedure described in “Deleting the 

registered signal” (x page 115).

Returns [NETWORK SETUP] and [E-mail set up] to factory default settings.

Deletes the image registered in [USER LOGO].

5)  Press the <ENTER> button.
6)  When the confirmation screen is displayed, press qw to select [OK], and press the <ENTER> button.

This function is used by a service person.