Panasonic SC-BT303 Manuale Utente

RQT9508

[BT300] 

\BT303\ 

: Front speakers

≥To prevent damage or scratches, lay down a soft cloth and perform 

assembly on it.

≥For assembly, use a Phillips-head screwdriver (not included).

≥For optional wall mount, refer to page 46.

≥You will need to obtain the appropriate screw eyes to match the walls or pillars to which they are going to be fastened.

≥Consult a qualified housing contractor concerning the appropriate procedure when attaching to a concrete wall or a surface that may not have 

strong enough support. Improper attachment may result in damage to the wall or speakers.

e.g.

≥Do not stand on the base. Be cautious when children are near.
e.g.

≥Be careful not to cross (short-circuit) or reverse the polarity of the speaker wires as doing so may damage the 

speakers.

2 Stands
(with cables)

Make sure you have all the indicated components before starting assembly, setup, and connection.

Keep the screws out of reach of children to prevent swallowing.

Slide into the groove.

Press into the groove.

Tighten securely.

Tighten securely.

Position the cable 
between the ridges.

Leave about 120 mm (4

23

/

32

)

Insert the wire fully.
: White

: Blue

Push!

Slide into 
the groove.

Press into the groove.

Tighten securely.

Insert the wire fully.
: White

: Blue

Push!

Leave about 120 mm (4

23

/

32

)

You can remove and use the cable 
from the stand. To reattach the 
cable, refer to page 46.

Screw eye
(not included)

Approx. 
150 mm
(5

29

/

32

)

String (not included)
Thread from the wall to the speaker and tie tightly.

BT300.book  7 ページ  ２００９年６月１２日　金曜日　午後１２時１３分