Manualsbrain.com
  1. Manuali
  2. Marche
  3. Panasonic
  4. PT-DZ21KU
  5. Manuale Utente

Panasonic PT-DZ21KU Manuale Utente

Scarica
Pagina di 179
[PROJECTOR SETUP] menu
108 - ENGLISH
Settings
[RS-232C]
Set the communication conditions of the <SERIAL 
IN>/<SERIAL OUT> terminal.
1)  Press ▲▼ to select [RS-232C].
2)  Press the <ENTER> button.
▶
z
The 
[RS-232C] screen is displayed.
3)  Press ▲▼ to select an item.
▶
■To set the communication 
condition of the <SERIAL IN> 
terminal
4)  Select [(IN) BAUDRATE] in Step 3).
5)  Press ◀▶ to switch [(IN) BAUDRATE].
▶
z
The setting will change as follows each time 
you press the button.
[9600]
[19200]
[38400]
6)  Press ▲▼ to select [(IN) PARITY].
7)  Press ◀▶ to switch [(IN) PARITY].
▶
z
The setting will change as follows each time 
you press the button.
[NONE]
[EVEN]
[ODD]
▶
■To set the communication 
condition of the <SERIAL OUT> 
terminal
4)  Select [(OUT) BAUDRATE] in Step 3).
5)  Press ◀▶ to switch [(OUT) 
BAUDRATE].
▶
z
The setting will change as follows each time 
you press the button.
[9600]
[19200]
[38400]
6)  Press ▲▼ to select [(OUT) PARITY].
7)  Press ◀▶ to switch [(OUT) PARITY].
▶
z
The setting will change as follows each time 
you press the button.
[NONE]
[EVEN]
[ODD]
▶
■To set the response
4)  Select [RESPONSE(ID ALL)] in Step 3).
5)  Press ◀▶ to switch [RESPONSE(ID 
ALL)].
▶
z
The setting will change as follows each time 
you press the button.
[ON]
[OFF]
[ON]
Returns the response when the ID 
setting is ALL.
[OFF]
Does not return the response when the 
ID setting is ALL.
6)  Press ▲▼ to select [GROUP].
7)  Press ◀▶ to switch [GROUP].
▶
z
The setting will change as follows each time 
you press the button.
[A]
[B]
[Z]
[A] to [Z]
Controls multiple projectors 
simultaneously by sending the ID of 
RS-232C. Set the group from [A] to [Z]. 
The projector responds when the ID of 
RS-232C matches the setting.
8)  Press ▲▼ to select [RESPONSE(ID 
GROUP)].
9)  Press ◀▶ to switch [RESPONSE(ID 
GROUP)].
▶
z
The setting will change as follows each time 
you press the button.
[ON]
[OFF]
[ON]
Returns the response when the ID 
setting is GROUP.
[OFF]
Does not return the response when the 
ID setting is GROUP.
Note
 
z
Refer to “<SERIAL IN>/<SERIAL OUT> terminal” 
(
 page 160) for the <SERIAL IN>/<SERIAL OUT> 
terminals and ID transmission in RS-232C.