Panasonic SA-BTX70 Manuale Utente

RQT9479

≥The following sound effects/modes may not be available or have no effect with some sources, or when headphones are used (> 16).

≥You may experience a reduction in sound quality when these sound effects/modes are used with some sources. If this occurs, turn the sound effects/modes off.

1 Press [SOUND] several times to select the mode.

≥You can also press [SOUND] and then [3, 4] to select the 

mode.

≥The selected effect will only be displayed on the main unit.

2

While the selected mode is displayed

2, 1] and select the desired setting.

∫ When only the supplied speakers are connected.

≥Underlined items are the factory presets.

≥You can also press [SURROUND] and then [3, 4] to select the mode.
≥The selected effect will only be displayed on the main unit.

While “MANUAL” is displayed
Press [

2, 1] and select the desired effect.

∫ When optional surround, surround back speakers are 

When 1 or 2 optional Panasonic wireless system(s) SH-FX70 are 
connected and the appropriate settings have been made in the “EASY 
SETUP” the following sound effects will be available.
≥Underlined items are the factory presets.

You can select sound quality settings.
– FLAT (Flat):

Cancel (no effect is added).

– HEAVY (Heavy): Adds punch to rock.
– CLEAR (Clear):

Clarifies higher sounds.

– SOFT (Soft):

For background music.

This unit will change the settings for the amount of 
bass depending on the source.
However you can also adjust the amount of bass for 
the source being played.
– 1 (Weakest effect)
– 2
– 3
– 4 (Strongest effect)
≥The setting you make is retained, and recalled 

every time you play the same type of source.

You can enhance the surround effect for low volume 
sound.
(Convenient for late night viewing.)
– ON
– OFF

OK

SOUND

SURROUND

-CH SELECT

: You can enjoy 5.1/7.1-channel surround-like effect 

using 2.1-channel speakers.
This function is effective only when playing 4.1 ch 
sources or above.

2CH STEREO: You can play any source in stereo without the 

surround sound effect.

You can enjoy a surround sound effect similar to 5.1 
ch (Dolby Digital or DTS) with any audio source, 
using the included front speakers and the subwoofer. 
You can also enjoy a surround sound effect with 
stereo sources such as CDs.

REFERENCE
Standard mode

WIDE
≥This mode widens the acoustic field of the front 

speakers. This has a good effect when there is 
little space between the speakers.

Sound is output as it was recorded/encoded.
Speaker output varies depending on the source.

You can enjoy sound from the front speakers, as well 
as the surround speakers even when playing a 
2-channel sound or non-surround sound.

Suitable for movie software, or the one recorded 
in Dolby Surround.

Adds 5.1-channel effects to stereo sources.

You can enjoy sound from all speakers with 
stereo sources.

You can play any source in stereo. Sound will be 
output to the front speakers and the subwoofer only 
and without the surround sound effect.

*1 7.1ch VS is not available when the audio source currently playing is 2.1 ch, 3.1 ch.
*2 The 7.1-channel surround-like effect will only function when playing 6 or more channel sources.
*3 Dolby Virtual Speaker is not available and “NOT CONDITIONAL” is displayed when the audio source currently playing is 3.1 ch, 3 ch, 1.1 ch or 1 ch.
*4 The effects do not work when audio is output from the HDMI AV OUT terminal.
≥“NOT CONDITIONAL” is displayed on the main unit if the setting is not active.

When the unit has been set for 4.1 ch or 6.1 ch output, it is not possible to select the sound effects for 2.1 ch or vice versa.

BTX70PP_eng.book  15 ページ  ２００９年６月２４日　水曜日　午後３時４２分