Panasonic SA-BTX70 Manuale Utente

RQT9479

1 Press and hold [–CH SELECT] for 3 seconds to 

2 Press [–CH SELECT] several times to select the 

Each time you press the button:
L R

—) RS_) RB_) LB_) LS_) SW

^""""""""""""""""""""""""b

L R:

Front speaker (left and right)

RS:

Surround speaker (right)

RB:

Surround back speaker (right)

LB:

Surround back speaker (left)

LS:

Surround speaker (left)

SW:

Subwoofer

≥“RS”, “RB”, “LB” and “LS” will only be displayed if the optional 

Surround, Surround back speakers are connected.

– The channels not included in the playing audio will not be displayed 

(subwoofer is displayed even if it is not included).

(When “L R” is selected)

3 Press [

2, 1] to adjust the balance of the front 

When “SW” or the optional surround, surround back speakers are 
connected and selected in step 

2.

4 Press [

3] (increase) or [4] (decrease) to adjust 

s6 dB to r6 dB

[AVCHD] [MPEG2]

It is possible to playback the High Definition (AVCHD format) video 
recorded on a Panasonic High definition Video Camera on a 
DVD-RAM/R/RW/R DL/+R/+RW/+R DL, or SD card and Standard 
Definition (MPEG2 format) Video recorded on the Panasonic SD Video 
Camera on a SD card.

1 Insert a disc or SD card. (> 16)

≥The “Video (AVCHD)” or “Video (MPEG-2)” screen is displayed.
≥If media containing data in different file formats is inserted, the 

file selection menu may be displayed.
Press [

3, 4] to select “Play Video (AVCHD)” or “Play Video 

(MPEG-2)” and press [OK].

2 Press [

3, 4, 2, 1] to select the title and press 

The status messages give you information about what is currently 
being played. Each time you press [STATUS], the information 
displayed will change.

When black bars are shown at the top, bottom, left, and right sides of 
the screen, you can enlarge the image to fill the screen.
1 Press [SUB MENU].
2 Press [

3, 4] to select “Screen Aspect” and press [OK].

3 Press [

2, 1] to select “Side cut” or “Zoom” and press [OK].

Normal:

Normal output

Side cut:

The black bars on the right and left sides of the 16:9 
image disappear and the image is enlarged. Please note 
that the right and left sides of the image are cut off when 
the black bar is not displayed.

Zoom:

The black bars on the top and bottom sides of the 4:3 
image disappear and the image is enlarged. Please note 
that the top and bottom sides of the image are cut off 
when the black bar is not displayed.

≥[BD-V] [DVD-V]: “Side cut” does not have any effect.

≥When “TV Aspect” (> 36) is set to “4:3” or “4:3 Letterbox”, the 

“Zoom” effect is disabled.

1 Press and hold [–SLEEP] for 3 seconds.
2 While “SLEEP

££” is displayed, 

Press [–SLEEP] several times to select the time (in minutes).

SLEEP 30 

) SLEEP 60 ) SLEEP 90 )SLEEP 120 )OFF

^""""""""""""""""""""""""""""""""b

e.g.

To confirm the remaining time
Press and hold [–SLEEP] for 3 seconds.
≥The sleep timer cannot be set while the Setup menu is displayed.

≥The sleep timer will be canceled in the following cases.
– When the sleep timer is set to “OFF”.
– When this unit is turned off from the remote control, main unit or via 

the VIERA Link.

STATUS

Play 



 T1     C1     0:05.14 

0:20.52 

Type of disc

Play status

T: Title
C: Chapter
PL: Playlist

Items change 
depending on the 
disc played.

Elapsed time in the title

Current position

Total time

No display

Depending on the kind of disc or the playback status, 
this display may not appear.

e.g., 

[BD-V]

-SLEEP

≥It may pause for a few seconds between images when 

editing such as partial deletion is performed.

≥High definition video (transfer rate of 18 Mbps or faster) 

cannot be played back correctly if it was recorded on a 
DVD compatible to double speed or slower.

To return to the previous screen
Press [RETURN].
To exit the screen
Press [TOP MENU/DIRECT NAVIGATOR].

To switch from other menus to AVCHD or MPEG2 menu
(If the media contains data in different file formats)

1) Press [START].
2) Press [

3, 4] to select “Menu” and press [OK].

3) Press [

3, 4] to select “Play Video (AVCHD)” or “Play 

Video (MPEG-2)” and press [OK].

SD Card

Play Video (AVCHD)

Select an action or press [RETURN].

Play Pictures (JPEG)

OK

RETURN

SUB 

MENU

Play Video (MPEG-2)

e.g., 

[SD]

BTX70PP_eng.book  18 ページ  ２００９年６月２４日　水曜日　午後３時４２分