Panasonic SC-BTT190 Manuale Utente
17
Getting s
tar
te
d
VQT4D57
Inserting or removing
media
media
≥ When inserting a media item, ensure that it is
facing the right way up.
≥ When removing the SD card, press the centre
of the card and pull it straight out.
≥ If you connect a Panasonic product with a USB
connection cable, the setup screen may be
displayed on the connected equipment. For
details, refer to the instructions for the
connected equipment.
displayed on the connected equipment. For
details, refer to the instructions for the
connected equipment.
≥ Use the front USB port when you connect a
iPod/iPhone, USB memory or a USB HDD.
The USB port on the rear panel is only for the
following devices :
– Wireless LAN Adaptor
– Communication Camera
The USB port on the rear panel is only for the
following devices :
– Wireless LAN Adaptor
– Communication Camera
Enjoying TV with unit’s
speakers
speakers
1
Connect the TV and the main unit. (> 12)
2
Press [EXT-IN] several times to select the
appropriate external input mode. (> 18)
≥ Reduce the volume on the TV to its
appropriate external input mode. (> 18)
≥ Reduce the volume on the TV to its
minimum, and then adjust the volume of the
main unit.
main unit.
Press [AUDIO] several times to select the
audio. (M1, M2)
audio. (M1, M2)
≥ Set “PCM-Fix” (> 33) to “Off”.
≥ Only works with Dolby Dual Mono.
≥ Only works with Dolby Dual Mono.
≥ You cannot change the audio type when the TV is
connected to this unit via the AUX terminal.
SD CARD
iPod
VOL
OPEN/CLOSE
*
* (For details > 22)
Selecting the type of audio
SC-BTT190GNGSGA-VQT4D57_mst.book 17 ページ ２０１２年１月１２日 木曜日 午前９時５９分