Panasonic PT-DW17KU Manuale Utente

 

z

Be careful to hold the lamp unit cover and to loosen the lamp unit 

cover fixing screws with the projector installed upward in the vertical 

direction since the lamp unit cover may open and the lamp case may 

drop off on its weight.

–▶This can cause severe injury or accidents.

▶

z

Use a Phillips screwdriver to turn the lamp case fixing screws of the lamp unit to be replaced (two screws 

each) counterclockwise until they turn freely, and then hold the lamp case handles to be replaced and pull 

out backward.

▶

z

Do not remove the black screws other than the lamp case fixing screws.

▶

z

When you loosen the lamp case fixing screws with the projector installed upward in the vertical direction, 

the lamp case may drop off on its weight. Be sure to hold the lamp case handle when you loosen the lamp 

case fixing screws.

▶

z

When removing the lamp case, make sure that the projector is stable and remove it in a safe place where 

the lamp case is dropped off.

Lamp case handles

Lamp case L

Lamp case R

Lamp case fixing screws

▶

z

Use a Phillips screwdriver to turn the lamp unit fixing screws (two screws) counterclockwise until they turn 

freely, and then remove the lamp unit from the lamp case.

▶

z

Hold the handles of the lamp unit and remove it.

▶

z

Do not remove the screws other than the lamp unit fixing screws.

Lamp unit fixing screws

Lamp unit

Lamp case handle

Lamp unit 

handles

Guide pins and guide holes

Lamp unit

(i)  Gently push the new lamp unit into the lamp case. Install the new lamp unit carefully so that the guide 

pins on the lamp case are inserted into the guide holes on the lamp unit.

•▶If the lamp unit is not installed properly, remove it and then gently install it again. Pushing it in forcibly 

or exerting excessive force may break the connector.

(ii) Use a Phillips screwdriver to firmly tighten the lamp unit fixing screws (two screws each).

▶

z

Make sure to attach the lamp unit properly.