Panasonic SC-BT07 Manuale Utente
43
RQT9483
Speaker installation option
You can attach all of the speakers (except subwoofer) to a wall.
≥The wall or pillar on which the speakers are to be attached should be
≥The wall or pillar on which the speakers are to be attached should be
capable of supporting 10 kg per screw. Consult a qualified building
contractor when attaching the speakers to a wall. Improper
attachment may result in damage to the wall and speakers.
Attaching to a wall
1 Drive a screw (not included) into the wall.
2 Fit the speaker securely onto the screw(s) with the hole(s).
Reattaching the speaker cables
4.0 mm
7.5 mm to 9.4 mm
At least 30 mm
3
mm to 5 mm
Wall or pillar
DO
NOT
NOT
DO
Attach to a wall without the base and the stand
72 mm
348.5 mm
In this position,
the speaker will
likely fall if
moved to the
left or right.
the speaker will
likely fall if
moved to the
left or right.
Move the
speaker so that
the screw is in
this position.
speaker so that
the screw is in
this position.
Front and surround speaker
Center speaker
190 mm
Insert the cable
from the bottom.
from the bottom.
Pull out the cable
through the hole.
through the hole.
Leave about
120 mm
120 mm
Optional speaker
settings
SCBT207GN-RQT9483-L.book 43 ページ ２００９年５月２５日 月曜日 午後９時３６分