Panasonic SC-BT07 Manuale Utente

RQT9483

Front speakers and Surround speakers

≥To prevent damage or scratches, lay down a soft cloth and perform 

assembly on it.

≥For assembly, use a Phillips-head screwdriver (not included).

≥For wall mount, refer to page 43.

≥You will need to obtain the appropriate screw eyes to match the walls or pillars to which they are going to be fastened.

≥Consult a qualified housing contractor concerning the appropriate procedure when attaching to a concrete wall or a surface that may not have 

strong enough support. Improper attachment may result in damage to the wall or speakers.

e.g.

≥Do not stand on the base. Be cautious when children are near.

e.g.

4  Stands
(with cables)

Make sure you have all the indicated components before starting assembly, setup, and connection.

Keep the screws out of reach of children to prevent swallowing.

Slide into the groove.

Press into the groove.

Tighten securely.

Tighten securely.

Position the cable 
between the ridges.

Leave about 120 mm 

Insert the wire fully.
: White

: Blue

Push!

≥Be careful not to cross (short circuit) or reverse the polarity of the speaker wires as doing so may damage the 

speakers.

Slide into 
the groove.

Press into the groove.

Tighten securely.

Insert the wire fully.
: White

: Blue

Push!

Leave about 120 mm 

You can remove and use the cable 
from the stand. To reattach the 
cable, refer to page 43.

Screw eye
(not included)

String (not included)
Thread from the wall to the speaker and tie tightly.

SCBT207GN-RQT9483-L.book  7 ページ  ２００９年５月２５日　月曜日　午後９時３６分