Panasonic SC-BT330 Manuale Utente

VQT2M13

≥ Refer to the operating instructions of the hub or router.
≥ You can perform this setup anytime by selecting “Network Easy Setting” in 

the Setup menu. (

> 38)

≥ You can redo these settings individually using “Network”. (> 38)
≥ If you experience problems after selecting “Wireless”, you should 

≥ After performing network settings on this unit, the settings (encryption level, 

etc.) of the Wireless router (Access point) might change. When you have 
trouble getting online on your PC, perform the network settings on your PC 
in accordance with the settings of Wireless router (Access point).

Occasionally, Panasonic may release updated firmware for this 
unit that may add or improve the way a feature operates. 
These updates are available free of charge.

This unit is capable of checking the firmware automatically 
when connected to the Internet via a broadband connection.
When a new firmware version is available, the following screen 
is displayed.

If downloading on this unit fails or this unit is not connected to 
the Internet, then you can download the latest firmware from 
the following website and burn it to a CD-R to update the 
firmware.
http://panasonic.net/support/
(This site is in English only.)
To show the firmware version on this unit. (

> 38, “System 

Information”)

DO NOT DISCONNECT the unit from the AC power or perform 
any operation while the update takes place.
After the firmware is installed, “FINISH” will be displayed on the 
unit’s display. Unit will restart and the following screen will be 
displayed.

≥ You can perform update anytime by selecting “Firmware Update” in the 

Setup menu. (

> 38)

≥ Downloading will require several minutes. It may take longer or the Internet 

may not be connected depending on the connection environment. 

≥ If you do not want to check for the latest firmware version, set “Automatic 

Update Check” to “Off”. (

> 38)

1. LAN cable connection or 
Connection to access point

:Pass

≥ Connection 

and settings 
of the hub 
and router

≥ Settings of 

"IP Address / 
DNS 
Settings“ 
(

> 38)

2. IP address setting

:Fail

3. Connection to gateway

:Fail

1. LAN cable connection or 
Connection to access point

:Pass

2. IP address setting

:Pass

3. Connection to gateway

:Fail

Cannot find the server.
(Error code: B019)

≥ Settings of “IP Address / DNS 

Settings” (

> 38)

Failed to connect to 
the server.
(Error code: B020)

≥ The server may be busy or the 

service may have been 
suspended. Please wait a few 
moments, and then try again.

≥ Settings of “Proxy Server 

Settings” (

> 38) and the router.

OK

Network Easy Setting (Internet Connection Check)

Complete.

- Connection to the Internet       :   Fail(Error code: B019)

Failed the connection test.

Cannot find the server.(Error code: B019)

Please refer to the operating instructions for the cause
of the error and the solution for it.

Press [OK].

Firmware updates

  Latest Online Version: x.xx
  Current Installed Version: x.xx
Do you want to start firmware update?
For the update information, please visit the
following website:
http://panasonic.net/support/

SC-BT230_330_730P_PC_VQT2M13_eng.book  21 ページ  ２０１０年１月６日　水曜日　午後１２時８分