NEC PX602WL-BK Manuale Utente
3
1. Introduction
Videos
• Wide range of input/output terminals (HDMI, DisplayPort, BNC, HDBaseT, etc.) and built-in monaural speaker
The projector is equipped with a variety of input/output terminals: HDMI, DisplayPort, BNC (5-core), computer
(analog), HDBaseT, etc.
(analog), HDBaseT, etc.
The projector’s HDMI input/output terminals and DisplayPort input terminal support HDCP.
HDBaseT, promoted and advanced by the HDBaseT Alliance, is a consumer electronic (CE) and commercial con-
nectivity technology.
nectivity technology.
• Slot for optional board
This projector has a slot for optional boards (sold separately).
• Simultaneous display of 2 images (PIP/PICTURE BY PICTURE)
Two images can be projected simultaneously with a single projector.
There are two types of layouts for the two images: “picture-in-picture” (PIP) in which a sub-picture is displayed
on the main picture, and “picture-by-picture” (PICTURE BY PICTURE) in which the main and sub pictures are
displayed next to each other.
on the main picture, and “picture-by-picture” (PICTURE BY PICTURE) in which the main and sub pictures are
displayed next to each other.
• Multi-screen projection using multiple projectors
This projector is equipped with multiple HDMI input & output terminals that can connect multiple projectors in a
daisy chain. A high quality picture is achieved by dividing and projecting high resolution videos among the various
projectors.
daisy chain. A high quality picture is achieved by dividing and projecting high resolution videos among the various
projectors.
Furthermore, the boundaries of the screens are smoothed using an edge blending function.
• Supports HDMI 3D format
This projector can be used to watch videos in 3D using commercially-available active shutter-type 3D eyewear
and 3D emitters that support Xpand 3D.
and 3D emitters that support Xpand 3D.
Network
• Convenient utility software (User Supportware) provided as standard
The three utility software stored in the enclosed NEC Projector CD-ROM (Virtual Remote Tool, PC Control Utility
Pro 4 (for Windows ) and PC Control Utility Pro 5 (for Mac OS )) can be used.
Pro 4 (for Windows ) and PC Control Utility Pro 5 (for Mac OS )) can be used.
• CRESTRON ROOMVIEW compatible
This projector supports CRESTRON ROOMVIEW,allowing multiple devices connected to the network to be man-
aged from a computer or controller.
aged from a computer or controller.
Energy-saving
• Energy-saving design with a standby power consumption of 0.5 watts
When the on-screen menu’s standby mode is set to “NORMAL”, the power consumption in the standby mode is
0.5 watts.
0.5 watts.
• “LIGHT MODE” for low power consumption and “Carbon Meter” display
The projector is equipped with an “LIGHT MODE” for reducing power consumption during use. Furthermore, the
power-saving effect when the LIGHT MODE is set is converted into the amount of reductions of CO
power-saving effect when the LIGHT MODE is set is converted into the amount of reductions of CO
2
emissions
and this is indicated on the confirmation message displayed when the power is turned off and at “Information” on
the on-screen menu (CARBON METER).
the on-screen menu (CARBON METER).