NEC PX602WL-BK Manuale Utente

2. Projecting an Image (Basic Operation)

❸ Turning on the Projector

NOTE:

• The projector has two power switches: A main power switch and a POWER button (POWER ON and OFF on the remote control)

• Turning on the projector:

1. Press the main power switch to the ON position (I).
The projector will go into standby mode.
2. Press the POWER button .
The projector will become ready to use.

• Turning off the projector:

1.  Press the POWER button.
The confirmation message will be displayed.
2.  Press the POWER button again.
The projector will go into standby mode.
3.  Press the main power switch to the OFF position (O).
The projector will be turned off.

1. Press the main power switch to the ON position ( I ).
The POWER indicator lights up red.*

* This indicates that the STANDBY mode is in [NORMAL]

setting.

(

→ page

114

168

)

WARNING

The projector produces a strong light. When turning on
the power, make sure no one within projection range is
looking at the lens.

NOTE:

• The [STANDBY MODE] setting will be disabled and the projector

will go into the sleep mode when the network service is utilized or

the projector receives HDBaseT signal. In the sleep mode, the fans

in the projector rotate for the purpose of interior parts protection.

Please refer to page

114

about the sleep mode.

2. Press the

(POWER) button on the projector cabinet

or the POWER ON button on the remote control.

The POWER indicator goes from a steady red light to

a flashing blue light, and the picture is projected on the
screen.
TIP:

• When the message “PROJECTOR IS LOCKED! ENTER YOUR

PASSWORD.” is displayed, it means that the [SECURITY]

feature is turned on. (

→ page

)

After you turn on your projector, ensure that the computer

or video source is turned on.

NOTE: The blue screen ([BLUE] background) is displayed when no

signal is being input (by factory default menu settings).

Standby

Blinking

Power On

Steady red light

Blinking blue

light

Steady blue

light

(

→ page

168

)