Samsung AH68-01959S Manuale Utente

With a built-in, dedicated 185W amplifier, the Subwoofer generates rich bass sounds.

Connect the System Connector cable from the main unit to the System Connector on the Subwoofer.

Rear of Subwoofer

Rear of Main unit

Pull the fixing tab of the Toroidal ferrite core to open it. 

Make a loop in the subwoofer power cord.

Attach the Toroidal ferrite core to the subwoofer power

cord as the figure shows and press it until it clicks. 

If you attach a Toroidal ferrite core to the power cord of the subwoofer, it will prevent help to prevent RF
interference from radio signals.

Front Speaker (R)

Rear Speaker (L)

Rear of

Subwoofer

Center Speaker

Front Speaker (L)

Rear Speaker (R)

WIRELESS RECEIVER MODULE

1

Connect the front and center speakers to the Subwoofer, referring to
pages 15~16.

With the subwoofer turned off, insert the TX card into the TX Card
Connection(WIRELESS) on the back of the subwoofer. 

Hold the TX card so that the slanted side faces leftward and insert the 

card into the port. 

The TX card enables communication between the subwoofer and the wireless receiver.

Connect the left and right rear speakers to the wireless receiving 
module. 

Plug the power cord of the wireless receiving module in the wall outlet
and switch the power switch <ON>. 

• Do not insert a card other than the TX card dedicated for the product. 

The product might be damaged or the card may not be removed easily.

• Do not insert the TX card upside down or in the reverse direction.
• If the TX Card is inserted, sound is not output from the Rear Speaker

connectors on the subwoofer.

Slanted side face left 

TX card

TXQ120(1~44P) ENG_CA  2007.3.15  9:43 AM  Page 16