Runco SC-35d Manuale Utente
Runco SC-30d/SC-35d Installation/Operation Manual
75
PRE
L
IMINAR
Y
To reset the Custom 1 or Custom 2 memory preset to its factory-default state, select it,
press
press
or
to highlight Reset and press ENTER.
Select 3D Processing from the Main Menu to set the following options related to
formatting and delivery of HDMI 3D content.
formatting and delivery of HDMI 3D content.
3D Mode: Select 3D Mode from the 3D Processing menu to specify how the Dimension
Digital Controller processes the “left eye” and “right eye” image components respectively.
Digital Controller processes the “left eye” and “right eye” image components respectively.
• Choose Auto to have the Dimension Digital Controller determine the appropriate 3D
mode based on the HDMI vendor-specific InfoFrame data. This is the default setting.
• Choose Off for 2D content.
• Choose Side-by-Side to have the
Dimension Digital Controller scale the left
and right image halves respectively to fill the
screen.
and right image halves respectively to fill the
screen.
Side-by-Side multiplexing is used with 1080i
source material.
source material.
• Choose Top-and-Bottom to have the
Dimension Digital Controller scale the top
and bottom image halves respectively to fill
the screen.
and bottom image halves respectively to fill
the screen.
Top-and-Bottom multiplexing is used with
720p or 1080p source material.
720p or 1080p source material.
• Choose Frame Packing to have the input
FPGA decode frame packed data into left and right eye data.
Reverse Eyes: By default, the Primary and Secondary video scalers in the Dimension
Digital Controller are dedicated to “left eye” and “right eye” image processing respectively.
To reverse this relationship, choose Reverse Eyes from the 3D Processing menu and set it
to On.
Digital Controller are dedicated to “left eye” and “right eye” image processing respectively.
To reverse this relationship, choose Reverse Eyes from the 3D Processing menu and set it
to On.
To save the settings for the current input and display mode to the
ISF Night or ISF Day memory preset, select Save ISF Night or Save
ISF Day from the Calibration menu (refer to Save ISF Night/Save
ISF Day on page 82).
ISF Night or ISF Day memory preset, select Save ISF Night or Save
ISF Day from the Calibration menu (refer to Save ISF Night/Save
ISF Day on page 82).
Note