Sony HT-SF1300 Manuale Utente
26
GB
2
Press
V/v repeatedly to select
the item. Then, press
.
3
Save the measurement result.
Select “SAVE” in step 2.
The measurement results are saved.
The measurement results are saved.
When error codes appear
Try the remedies and perform the Auto
Calibration again.
Calibration again.
To rectify the error
1
Record down the error code.
2
Press
, “RETRY Y” appears on the
display.
3
Rectify the error.
4
Press
to perform Auto Calibration again.
Item
Explanation
RETRY
Performs the Auto
Calibration again.
Calibration again.
SAVE Saves
the
measurement
results and exits the setting
process.
process.
WARN CHK
PHASE
Displays the phase of each
speaker (in phase/out of
phase). See “When you
select “PHASE”” (page 27).
speaker (in phase/out of
phase). See “When you
select “PHASE”” (page 27).
DISTANCE
Displays the measurement
result for speaker distance.
result for speaker distance.
LEVEL
Displays the measurement
result for speaker level.
result for speaker level.
EXIT
Exits the setting process
without saving the
measurement results.
without saving the
measurement results.
Error code
Cause and remedies
ERROR 32
None of the speakers were
detected. Make sure that the
optimizer microphone is
connected properly and perform
the Auto Calibration again.
If the optimizer microphone is
connected properly but the error
code appears, the optimizer
microphone cable may be
damaged or improperly connected.
detected. Make sure that the
optimizer microphone is
connected properly and perform
the Auto Calibration again.
If the optimizer microphone is
connected properly but the error
code appears, the optimizer
microphone cable may be
damaged or improperly connected.
ERROR F 33
• None of the front speakers are
connected or only one front
speaker is connected.
speaker is connected.
• The optimizer microphone is not
connected.
ERROR SR 33 Either the left or right surround
speakers is not connected.
ERROR SW 33 Subwoofer is not connected.
Connect the subwoofer to the
SUBWOOFER terminal.
SUBWOOFER terminal.
ERROR 33
Wrong speaker detection due to
noise. Make sure the environment
is quiet during Auto Calibration.
noise. Make sure the environment
is quiet during Auto Calibration.
ERROR 35
A sound similar to the beep sound
from the speakers while
performing Auto Calibration is
detected. Perform the Auto
Calibration again.
from the speakers while
performing Auto Calibration is
detected. Perform the Auto
Calibration again.