Sony HT-7100DH Manuale Utente
53
US
D:\CANNES\SONY_HA\JOB 2007\IM\HT-7100DH\US_HT-7100DH_data\US05AMP_HT-7100DH-
U.fm
U.fm
masterpage: Right
HT-7100DH
3-093-550-11 (1)
T
u
ne
r Operations
r Operations
1
Press TUNER repeatedly to
select the FM or AM band.
select the FM or AM band.
2
Press TUNING + or TUNING –.
Press TUNING + to scan from low to
high; press TUNING – to scan from high
to low.
The receiver stops scanning whenever a
station is received.
high; press TUNING – to scan from high
to low.
The receiver stops scanning whenever a
station is received.
Using the controls on the
receiver
receiver
1
Turn INPUT SELECTOR to select the FM
or AM band.
or AM band.
2
Press TUNING MODE repeatedly to select
“AUTO T.”.
“AUTO T.”.
3
Press TUNING + or TUNING –.
In case of poor FM stereo
reception
reception
If the FM stereo reception is poor and “ST”
flashes on the display, select monaural audio
so that the sound will be less distorted.
• To select monaural audio, you can
flashes on the display, select monaural audio
so that the sound will be less distorted.
• To select monaural audio, you can
– press FM MODE repeatedly until the
“MONO” indicator lights up on the
display.
display.
– set “FM MODE” in TUNER menu to “FM
• To return to stereo mode, you can
– press FM MODE repeatedly until the
“MONO” indicator on the display do not
light up.
light up.
– set “FM MODE” in TUNER menu to “FM
Enter the frequency of a station directly by
using the numeric buttons.
using the numeric buttons.
1
Press TUNER repeatedly to
select the FM or AM band.
select the FM or AM band.
You can also use INPUT SELECTOR on
the receiver.
the receiver.
2
Press D.TUNING.
3
Press the numeric buttons to
enter the frequency.
enter the frequency.
Example 1: FM 102.50 MHz
Select 1 b 0 b 2 b 5 b 0
Select 1 b 0 b 2 b 5 b 0
Example 2: AM 1,350 kHz
Select 1 b 3 b 5 b 0
Select 1 b 3 b 5 b 0
4
Press ENTER.
You can also use MEMORY/ENTER on
the receiver.
the receiver.
Tip
If you have tuned in an AM station, adjust the
direction of the AM loop antenna for optimum
reception.
direction of the AM loop antenna for optimum
reception.
If you cannot tune in a station
Make sure you have entered the right
frequency. If not, repeat steps 2 to 4. If you
still cannot tune in a station, the frequency is
not used in your area.
frequency. If not, repeat steps 2 to 4. If you
still cannot tune in a station, the frequency is
not used in your area.
Direct tuning
MEMORY
-/--
>
10
TUNER
SA-CD//CD
TV
SAT
AUX
DMPORT
RECEIVER
CLEAR
ENTER
0//10
8
7
4
1
2
3
6
9
5
SLEEP
CATEGORY
MODE
AUTO CAL
2CH
A.F.D.
MOVIE
MUSIC
D.TUNING
1
4
3
2