Sony HM-982RW Manuale Utente
58
Preparation section
Basic section
Application section
Knowledge section
Convenient recording of CD player output
3
1
2
1 Place a recordable CD-R or CD-RW disc.
fl
2 Load the recording source disc in the CD player.
¢
Make the preparations for recording.
Select the recording speed.
Select the desired CD track and play it.
Be sure to put the CD recorder in stop mode.
High-speed recording makes possible digital-to-digital recording from a CD to CD-R/RW at a double speed. (High-
speed recording is not available in analog-to-digital recording.)
The recording source can be a finalized CD-R, but digital-to-digital recording may not be available with certain
discs.”Digital recording and SCMS”
speed recording is not available in analog-to-digital recording.)
The recording source can be a finalized CD-R, but digital-to-digital recording may not be available with certain
discs.”Digital recording and SCMS”
A
High-speed recording of a single track in a CD
(O.T.E.) (High)
÷ When a CD-R/RW is loaded in the CD recorder, the CD-R IN
indicator may blink for a while.
“OPC (Optimum Power Control)”
“OPC (Optimum Power Control)”
‡
÷ High-speed recording from a CD-RW is not possible. The CD-
RW should be recorded at the normal speed.
P
1 Press the MENU key.
2 Press the MULTI CONTROL keys to select “O.T.E.
Speed ?”, then press the SET key.
3 Press the MULTI CONTROL keys to select
“<High>”, then press the SET key.
4
Start recording.
1 Press the MENU key.
2 Press the MULTI CONTROL keys to select “O.T.E.
Mode ?”, then press the SET key.
3 Press the MULTI CONTROL keys to select
“CD
=CDR<High>”, then press the SET key.
Each press switch the modes as follows.
<High> ............ (Recording at double speed)
<Norm> .......... (Recording at normal speed)
1 Start playback of CD.
2 Select the desired CD track and play it.
\
\
\
\
#
#
MULTI
CONTROL
SET
#
#
MULTI
CONTROL
SET
CD
6
Each press switch the modes as follows.
CD
=CDR<High>
CD
=TAPE
Twin Rec
CD
CDR
=
When you are operating the remote, press the O.T.E.
CD
CD
=CDR key.
÷ Even when the recording is started in the middle of the track,
playback restarts and recording start from the beginning of
the track.
the track.
÷ The high-speed playback sound of the CD is played at a low
volume during high-speed recording.
÷ When either the CD playback or CDR recording operation
stops, the other operation also stops.
÷ Although high-speed recording starts digital-to-digital record-
ing automatically, this may sometimes be unavailable due to
the SCMS (
the SCMS (
A). In this case, record the analog input at the
normal speed.
P
÷ When recording completes, the CD player enters pause mode.
If the last recorded track is the final track in the disc, the CD
player enters stop mode.
player enters stop mode.