JVC TH-A10 Manuale Utente
58
To change the transmittable signals for operating a
CATV converter or DBS tuner ——————————
CATV converter or DBS tuner ——————————
1.
Set the remote control mode to “CATV/DBS.”
2.
Press and hold TV/CATV/DBS POWER.
3.
Press TV/DBS.
4.
Enter manufacturer’s code (three digits) using
buttons 1–9, and 0.
buttons 1–9, and 0.
See the list on page 60 to find the code.
Examples: For a JVC product, press 7, 7, then 5.
Examples: For a JVC product, press 7, 7, then 5.
For a Pioneer product, press 1, 4, then 4.
5.
Release TV/CATV/DBS POWER.
After setting the remote control mode selector to “CATV/
DBS,” you can perform the following operations on the CATV
convertor or on the DBS tuner:
DBS,” you can perform the following operations on the CATV
convertor or on the DBS tuner:
TV/CATV/DBS POWER: Turns on and off the CATV converter
or DBS tuner.
CHANNEL +/–
: Changes the channels.
1 – 10, 0, 100+ (+10) : Selects the channel.
100+ (+10) button will function as the
ENTER button if your equipment
requires pressing ENTER after selecting a
channel number.
ENTER button if your equipment
requires pressing ENTER after selecting a
channel number.
Note:
• Refer to the manual supplied with your CATV converter or
• Refer to the manual supplied with your CATV converter or
DBS tuner.
6.
Try to operate your CATV converter or DBS tuner by
pressing TV/CATV/DBS POWER.
pressing TV/CATV/DBS POWER.
When your CATV converter or DBS tuner turns on or off, you
have entered the correct code.
If there are more than one code listed for your brand of CATV
converter or DBS tuner, try each one until the correct one is
entered.
have entered the correct code.
If there are more than one code listed for your brand of CATV
converter or DBS tuner, try each one until the correct one is
entered.
Manufacturer
Code
ECHOSTAR
21
GI JERROLD
01, 02, 03, 04, 05,
06, 07, 08
06, 07, 08
HAMLIN/REGAL
15, 16, 17, 18
PIONEER
13, 14
RCA
19
SCIENTIFIC ATLANTA
09, 10
SONY
20
ZENITH
11, 12
Manufactures’ codes are subject to change without notice. If they
are changed, this remote control cannot operate the equipment.
are changed, this remote control cannot operate the equipment.
To change the transmittable signals for operating
another manufacturer’s VCR ——————————
another manufacturer’s VCR ——————————
1.
Set the remote control mode to “AUDIO/TV/VCR.”
2.
Press and hold VCR POWER.
3.
Press VCR.
4.
Enter manufacturer’s code (three digits) using
buttons 1–9, and 0.
buttons 1–9, and 0.
See the list on pages 61 and 62 to find the code.
Examples: For a JVC product, press 0, 0, then 8.
Examples: For a JVC product, press 0, 0, then 8.
For a Funai product, press 0, 0, then 0.
5.
Release VCR POWER.
Following button can be used for operating the VCR (with the
remote control mode selector set to “AUDIO/TV/VCR”):
remote control mode selector set to “AUDIO/TV/VCR”):
VCR POWER : Turns on and off the VCR.
After pressing VCR or VCR CONTROL (with the remote
control mode selector set to “AUDIO/TV/VCR”), you can
perform the following operations on the VCR:
control mode selector set to “AUDIO/TV/VCR”), you can
perform the following operations on the VCR:
PLAY
: Starts playback.
1
: Rewinds a video tape.
¡
: Fast winds a video tape.
STOP
: Stops operation.
PAUSE : Pauses.
¶ REC : Starts recording or enters recording pause.
¶ REC : Starts recording or enters recording pause.
After pressing VCR:
CHANNEL +/– : Changes the TV channels on the VCR.
1 – 10, 0, 100+ (+10) : Selects the TV channels.
CHANNEL +/– : Changes the TV channels on the VCR.
1 – 10, 0, 100+ (+10) : Selects the TV channels.
100+ (+10) button will function as the
ENTER button if your VCR requires
pressing ENTER after selecting a channel
number.
ENTER button if your VCR requires
pressing ENTER after selecting a channel
number.
Notes:
• Refer to the manual supplied with your VCR.
• You can use either VCR button or the VCR CONTROL
• Refer to the manual supplied with your VCR.
• You can use either VCR button or the VCR CONTROL
button to activate the buttons listed above. If you press VCR,
the playing source also changes. On the other hand, if you
press VCR CONTROL, the playing source does not change.
the playing source also changes. On the other hand, if you
press VCR CONTROL, the playing source does not change.
6.
Try to operate your VCR by pressing VCR POWER.
When your VCR turns on or off, you have entered the correct
code.
If there are more than one code listed for your brand of VCR,
try each one until the correct one is entered.
code.
If there are more than one code listed for your brand of VCR,
try each one until the correct one is entered.
Manufacturer
Code
Manufacturer
Code
JVC
01, 02, 03
PHILIPS
09
EMERSON
11, 26
RCA
05, 06
FISHER
29
SAMSUNG
24
FUNAI
10, 14, 15, 16 SANYO
21, 22, 23
GOLD STAR
12
SHARP
27, 28
HITACHI
04
SHINTOM
30
MITSUBISHI 13
SONY
18, 19, 20
NEC
25
ZENITH
08
PANASONIC
07, 17
Manufactures’ codes are subject to change without notice. If they
are changed, this remote control cannot operate the equipment.
are changed, this remote control cannot operate the equipment.
Operating Other Manufacturers’ Video Equipment
TH-A10[J]7/1
00.2.24, 14:59
58