Bose Cinemate Manuale Utente

Poor or 

distorted 

sound

•  Remove all protective films from the system.
•  Secure all cable connections on the soundbar, TV, and connected sources.
•  If you see the error message 

Cannot find Acoustimass:

 

- Plug in the Acoustimass

®

 module.

 

- Pair the Acoustimass module with the console (see “If your console 

cannot find the Acoustimass

®

 module”).

•  If using the analog or 

 connector, decrease the volume on your source.

•  Factory reset the system (see page 32) and run the ADAPTiQ

® 

audio 

calibration

 

(see page 20).

Intermittent 

sound

•  Secure all cable connections on the soundbar, TV, and connected sources.
•  Move system away from potential interference, such as a wireless router, 

cordless phone, television, microwave, etc. 

The Acoustimass module and console are paired at the factory. However, if you  

see the error message 

Cannot find Acoustimass on the display, perform this 

pairing procedure:
1.  Unplug the Acoustimass module.
2.  Press 

 on the remote control.

3.  Press   until 15 PAIR ACOUSTIMASS appears on the display.
4.  Press 

.

Plug in Acoustimass appears on the display. 

5.  Plug the AC power cord into an AC (mains) outlet.

After the Acoustimass module connects to the console, 

appears on the display.

Care and Maintenace