Shark V1510 Manuale Utente
PRECAUTIONARY MEASURES
3
1.
Do not operate the vacuum
cleaner too close to heaters or
radiators.
cleaner too close to heaters or
radiators.
2.
Before inserting the power plug
into the wall outlet, make sure that
your hands are dry.
into the wall outlet, make sure that
your hands are dry.
3.
Before you start vacuuming, make
sure to remove large or sharp
objects that might damage the HEPA
Filter.
sure to remove large or sharp
objects that might damage the HEPA
Filter.
5.
Do not pick up anything that is
burning or smoking such as
cigarettes, matches or hot ashes.
burning or smoking such as
cigarettes, matches or hot ashes.
6.
Do not use without HEPA filter in
place.
place.
7.
Do not bend, trample or pull the
hose by force. Do not operate
with a damaged hose.
hose by force. Do not operate
with a damaged hose.
8.
When vacuuming fine dust
particles such as gyproc dust,
flour or any other fine dust, empty
the dust cup and "TAPCLEAN"
the dust cup filter frequently to
avoid over heating the motor.
particles such as gyproc dust,
flour or any other fine dust, empty
the dust cup and "TAPCLEAN"
the dust cup filter frequently to
avoid over heating the motor.
4.
When pulling out the power plug
from the wall outlet, pull the plug
not the power cord.
from the wall outlet, pull the plug
not the power cord.
IMPORTANT:
If the suction opening of the hose is BLOCKED, switch off the vacuum
cleaner and remove the blocking substance before you start the unit
again.
cleaner and remove the blocking substance before you start the unit
again.
OPERATING INSTRUCTIONS
4
3. To use the flexible hose with the
dusting brush, hold the hose in one
hand and with the other, pull out the
dusting brush and turn clockwise to
lock in place. (Fig. 4)
hand and with the other, pull out the
dusting brush and turn clockwise to
lock in place. (Fig. 4)
WARNING:
Always unplug from electrical
outlet before opening the dust cup
(container).
(container).
Note
: HEPA dust cup filter must be used
when operating the hand vacuum.
Using The Unit As A Hand
Vacuum
Vacuum
1. Insert the dusting brush/hose
connector into the brush chamber
exhaust port. Lock the flexible hose in
place by clipping the hose into the
hose holder. (Fig. 1)
exhaust port. Lock the flexible hose in
place by clipping the hose into the
hose holder. (Fig. 1)
CAUTION:
The hand vacuum is a
very powerful unit. Make sure that you
hold it firmly, otherwise it can slip out
of your hand and cause injury.
hold it firmly, otherwise it can slip out
of your hand and cause injury.
Cleaning With the Hose
To use the hand vacuum with only the
hose and the dusting brush or crevice
tool:
1. Rotate the brush cover by pushing on
hose and the dusting brush or crevice
tool:
1. Rotate the brush cover by pushing on
the brush cover release button until it
clicks in place. (Fig. 2)
clicks in place. (Fig. 2)
2. Remove the flexible hose from the
brush chamber exhaust port and take
the hose out from the hose holder.
(Fig. 3)
the hose out from the hose holder.
(Fig. 3)
Fig. 1
Fig. 2
Fig. 3
Fig. 4
4. To use the flexible hose with the
crevice tool, make sure that the
brush is in the storage position
and insert the crevice tool into the
opening of the hose. (Fig. 5)
brush is in the storage position
and insert the crevice tool into the
opening of the hose. (Fig. 5)
Fig. 5