HP (Hewlett-Packard) 22A Manuale Utente

 Select Rear

POWER and FREQUENCY

2 and 5

This command causes the synthesizer to examine only the rear
panel source module interface connector to determine the type

of source module (if any) connected. The instrument frequency
limits and multiplier are altered according to the source module

connected. However, the leveling point is not changed. See

Leveling Point Module to set the synthesizer to level at the

output of the source module.

An asterisk next to the key label indicates this feature is active.

SYSTem:MMHead:SELect 
SYSTem:MMHead:SELect?

NONE

Module Menu

Monitor Menu

This 

 (Option 002 only) accesses the menu which allows you

to output internally-generated AM and FM waveforms to the rear
panel AM/FM OUTPUT connector. It also accesses the 
which allow you to display the AM depth and FM deviation of the
modulation waveforms.

 On/Off 

AM

Outputs the AM waveform to the AM/FM
OUTPUT connector.

 On/Off 

Outputs the FM waveform to the AM/FM
OUTPUT connector.

Meter On/Off AM

Displays the AM depth of the modulating

signal.