Sony MZ-NH1 Manuale Utente
42
•
The pause function cannot be turned on or off
manually during synchro-recording.
manually during synchro-recording.
•
Do not switch the “SYNC REC
”
setting while
recording. Recording may not be done
properly.
properly.
•
Even when there is no sound on the sound
source, there may be cases when recording
does not pause automatically during synchro-
recording due to the noise level emitted from
the sound source.
source, there may be cases when recording
does not pause automatically during synchro-
recording due to the noise level emitted from
the sound source.
•
If a silent portion is encountered for
approximately 2 seconds during synchro-
recording from a sound source other than a
CD or an MD, a new track mark is
automatically added at the point where the
silent portion ends.
approximately 2 seconds during synchro-
recording from a sound source other than a
CD or an MD, a new track mark is
automatically added at the point where the
silent portion ends.
1
Make connections.
Use the appropriate optical cable to
suit the source equipment. For details,
see “Optional accessories” (page 79).
suit the source equipment. For details,
see “Optional accessories” (page 79).
2
While the recorder is stopped, enter
the menu and select “REC Set” -
“SYNC REC” - “SYNC On”.
the menu and select “REC Set” -
“SYNC REC” - “SYNC On”.
Notes
On the recorder
MENU
5-way control key
(NENT, FR, FF)
(NENT, FR, FF)