Nilfisk-Advance America RS 501 Manuale Utente
SERVICE MANUAL
ENGLISH
RS 501
33015500(3)2008-02
33
DUST AND DEBRIS COLLECTION SYSTEM
SUCTION INLET DISASSEMBLY/ASSEMBLY
Disassembly
Remove the side brooms (see the procedure in the relevant paragraph).
Lower the suction inlet (12), according to the procedure shown in the User Manual.
Engage the parking brake with the lever (66).
Turn the ignition key (76) to OFF position and remove it.
Disconnect the hydraulic system hoses (A) and (B) from the suction inlet (C) and plug them.
Disconnect the dust control system water hose (D).
Remove the nuts (E) and pins (F).
Move the suction inlet (C) forward, and loosen the suction hose clamp (G).
Disconnect the suction hose (H) from the suction inlet.
Remove the suction inlet (C).
Lower the suction inlet (12), according to the procedure shown in the User Manual.
Engage the parking brake with the lever (66).
Turn the ignition key (76) to OFF position and remove it.
Disconnect the hydraulic system hoses (A) and (B) from the suction inlet (C) and plug them.
Disconnect the dust control system water hose (D).
Remove the nuts (E) and pins (F).
Move the suction inlet (C) forward, and loosen the suction hose clamp (G).
Disconnect the suction hose (H) from the suction inlet.
Remove the suction inlet (C).
Assembly
Assemble the components in the reverse order of disassembly.
If necessary, perform the suction inlet and skirt height and operation check (see the procedure in the relevant paragraph).
If necessary, perform the suction inlet and skirt height and operation check (see the procedure in the relevant paragraph).
A
B
H
G
F
C
E
F
D
E
S301487
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.