Nilfisk Alto ATTIX 965-0H/M SD XC Manuale Utente

4

1) 

OEL = Occupational Exposure Limit

Original Instructions

ATTIX 9 H/M

During the following work, ensure that dust is not unnecessarily 
spread around. Wear a P2 breathing mask.

Only carry out maintenance work described in the operating instruc-
tions.

Always pull out the mains plug before cleaning and maintenance of 
the vacuum cleaner.

During maintenance and cleaning, handle the vacuum cleaner in 
such a manner that there is no danger for maintenance staff or other 
persons.

In the maintenance area
1.  Use filtered compulsory ventilation
2.  Wear protective clothing
3.  Clean the maintenance are so that no harmful substances get 

into the surroundings

Before removing the vacuum cleaner from the area contaminated 
with harmful substances:
1.  Clean the outside of the vacuum cleaner, wipe it clean or pack 

the vacuum cleaner in well sealed packaging

2.  and avoid spreading deposited harmful dust.

Warning: Do not reuse the essential filter element after removal out 
of the appliance (only for class H appliances).

As an extension lead, only use the version specified by the manufac-
turer or one of a higher quality.
When using an extension lead, check the minimum cross-sections 
of the cable:

up to 20 m

1.5 mm

2

2.5 mm

2

20 to 50 m

2.5 mm

2

4.0 mm

2

1.  It is recommended that the vacuum cleaner should be connected 

via a residual current circuit breaker.

2.  Arrange the electrical parts (sockets, plugs and couplings) and 

lay down the extension lead so that the protection class is main-
tained.

3.  Connectors and couplings of power supply cords and extension 

leads must be watertight.