Little Wonder 5612-00-01 Manuale Utente

The fan has a 3/4-16 nut welded on fan hub. Turn a 3/4-

16 x 5" long grade 5 (or better) bolt into the nut to jack or 

push the fan off the engine. (Schiller Grounds Care, Inc. 

P/N 910515 Bolt-Jack Fan is recommended.)

Replace damaged or worn fan with a new one.  If during 

fan removal the key (#64164-13) was removed from the 

keyway, reinstall it by applying a few drops of the Loctite 

380 instant adhesive (“Black Max” P/N 38050) on the key, 

and load the key in the keyway of the shaft. (Cure time is 

approx. 1 min.)

Use a new bolt (#64123-127) (add Loctite 242 to new 

bolt) and washer (#910527) and complete fan installation.  

Insure a secure fit upon re-assembling. Torque bolt to 

39-51 Ft. lbs.