Windsor CBCD20 Manuale Utente

86306300 CHARIOT BURNISHER  11/09/07 

 
The Chariot is a battery powered, self propelled, 
hard floor burnisher intended for commercial use. 
The appliance spins a high-speed burnishing pad in 
contact with the floor surface to produce a high 
luster shine. 
 
The machines primary systems are the burnishing 
system, the dust control system and the operator 
control system. 
 
The function of the burnishing system is to spin a 
high-speed burnishing pad in contact with a floor 
surface that has had a burnishable floor finish 
applied. The burnishing pad can be lowered to the 
floor and raised by the operator, the operator can 
also control the pad pressure by use of the control 
knob. The burnishing pad will spin only when the 
machine is directed to move by the operator. 
 
The function of the dust control system is to collect 
the dust that is created during the burnishing 
process. It is normal for a portion of the floor finish to 
be removed in the form of dust during the process. 
While burnishing, air movement is created within the 
burnishing head by the spinning pad. The dust that 
is also created is entrained in the air stream and 
transported to a filter bag where it is collected and 
separated from the air stream. The filter bag can be 
easily changed without releasing the collected dust. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
The function of the operator control system is to 
control the direction and speed of the machine. The 
directional control system consists of the direction 
control switch, throttle pedal, operator presence 
pedal, speed control switch, drive reset switch, 
emergency stop/brake switch, steering wheel, propel 
controller, and drive wheel. The directional control 
switch signals forward or reverse direction. The 
controller interprets signals from the throttle pedal to 
command the drive wheel to propel or slow the 
machine. The drive reset switch is to make sure the 
operator is on platform before machine will propel.  
The operator presence pedal is to make sure the 
operator keeps both feet safely on platform while 
driving. The steering wheel points the drive wheel in 
the direction desired by the operator. The parking 
brake automatically engages when the operator 
steps off the platform.  The emergency stop/brake 
can be used to hold the machine on slopes.