Emerson Model 1700 Manuale Utente

4.2.2

Configure Volume Flow Measurement Unit for liquid

applications

Display (standard)

OFF-LINE MAINT

 > OFF-LINE CONFG > UNITS > VOL

Chinese-language
display

Offline Maintain

 > Configuration > Units > Volume Flow Rate

ProLink II

ProLink

 > Configuration > Flow > Vol Flow Unit

ProLink III

Device Tools

 > Configuration > Process Measurement > Flow

Field Communicator Configure > Manual Setup > Measurements > Flow > Volume Flow Unit

Volume Flow Measurement Unit

 specifies the unit of measurement that will be displayed for the

volume flow rate. The unit used for the volume total and volume inventory is based on this
unit.

Before you configure Volume Flow Measurement Unit, be sure that Volume Flow Type is set to
Liquid

.

Set Volume Flow Measurement Unit to the unit you want to use.

The default setting for Volume Flow Measurement Unit is l/sec (liters per second).

If the measurement unit you want to use is not available, you can define a special measurement unit.

Options for Volume Flow Measurement Unit for liquid applications

The transmitter provides a standard set of measurement units for Volume Flow Measurement
Unit

, plus one user-defined measurement unit. Different communications tools may use

different labels for the units.

Options for Volume Flow Measurement Unit for liquid applications

Cubic feet per second

CUFT/S

ft3/sec

ft3/sec

ft3/sec

Cuft/s

Cubic feet per minute

CUF/MN

ft3/min

ft3/min

ft3/min

Cuft/min

Cubic feet per hour

CUFT/H

ft3/hr

ft3/hr

ft3/hr

Cuft/h

Cubic feet per day

CUFT/D

ft3/day

ft3/day

ft3/day

Cuft/d

Configure process measurement

28