Acer EM-7T HM50/70 KB.I1700.415 Manuale Utente

98

Chapter 3

Replacing the CPU Fan

Replacing the Thermal Module

IMPORTANT: Apply a suitable thermal grease and ensure all heat pads are in place before replacing the Thermal 
Module.

The following thermal grease types are approved for use:

•

Silmore GP50

•

Honeywell

•

Jet Motor 7762

The following thermal pads are approved for use:

•

 Eapus XR-PE

1. Align the screw holes on the CPU Fan and 

Mainboard and replace the Fan.

2. Replace the three screws to secure the Fan to the 

Mainboard.

3. Connect the Fan power cable to the Mainboard connector.

1. Remove all traces of thermal grease from the CPU using a lint-free cloth or cotton swab and Isopropyl 

Alcohol, Acetone, or other approved cleaning agent. 

2. Apply a small amount of thermal grease to the centre of the CPU—there is no need to spread the grease 

manually, the force used during the installation of the Thermal Module is sufficient.