Honeywell THR872CUK Manuale Utente

tm

After installation,  you should check to make sure the system is 
working properly.

1  Press the thermostat OFF button.

2  Check the power supply to make sure the system is on and the 

green light on the relay box is off.

3  Press the thermostat MAN button, then press the p button to 

raise target temperature to maximum (35°C).

 

If the system is set up properly, the “heating” symbol should 
appear on the thermostat display, the heating system should 
begin running, and the green light on the relay box should be on. 
You can switch between OFF and MAN several times to verify that 
the system is operating properly.

4  To stop the test, press AUTO to run the program schedule, or 

MAN to reset the temperature manually. (If you select Manual 
control, reduce the target temperature to an appropriate level.)

12:34

 

PM

12:34

 

PM

12:34

 

PM

23.

5

°

35.

0

°

35.

0

°

Thu   30/12/10

Thu   30/12/10

Thu   30/12/10

Room Temp

TARGET TEMP

AUTO   

MAN 

 

 OFF

AUTO   

MAN

   OFF

Press 

OFF, check heating unit

Press 

MAN, set temperature to 35°C

Make sure heating symbol appears

Installer settings allow you to customise how your system 
works. Check the tables on pages 28-31 to see if any settings 
need to be changed.

1  Press the thermostat OFF button.

2  Press and hold the i, < and > buttons until the screen 

changes.

3  Press the + or - button to scroll through functions quickly 

until you find one you want to change. 

4  Press the p or q buttons to change any setting, then 

press OK to save the new setting.

 

To exit installer setup, press any MODE button (Auto, 
Manual or Off).

12:34

 

PM

1:CL

23.

5

°

12

Thu   30/12/10

Room Temp

CLOCK SELECT

AUTO   

MAN 

 

 OFF

Press and hold to enter installer mode

1   2 

Press to scroll 
through functions

Press to change 
setting