Honeywell 96D Manuale Utente
24
96d User Manual
M-511401
Honeywell
8/10
System Programming
Tx Info Menu
Tx Info Menu
Ident Menu
The Ident, or identification menu allows a component’s network ID to be
consulted:
consulted:
The upper right corner of the screen shows the component’s address. If
the address of the device whose information must be viewed is known:
the address of the device whose information must be viewed is known:
•
Use the arrows to move the cursor arrow to the on-screen address
•
Press Enter (the value can be edited while the number is flashing)
•
Use the up or down arrows to increase or decrease the value
•
Press Enter again to validate the entry and display the information
for the desired device.
for the desired device.
The bottom left corner of the display shows the transmitter name (ex.:
301D2 - product name) and the sensor type (ex.: CH4 - methane
sensor). These values can also be changed for Group or Vulbus
product types. The procedure is identical for both fields:
301D2 - product name) and the sensor type (ex.: CH4 - methane
sensor). These values can also be changed for Group or Vulbus
product types. The procedure is identical for both fields:
Programming or changing a product or sensor type
•
Use the arrows to move the cursor to the product type field.
•
Press Enter to select the field (the value can be modified when
flashing)
flashing)
•
Use the arrows to scroll through the list of product types and press
Enter when the desired product or sensor appears
Enter when the desired product or sensor appears
1. Tx Info
001
-Ident-
NotVul
CO2 (IR)
CO2 (IR)