Honeywell 96D Manuale Utente
34
96d User Manual
M-511401
Honeywell
8/10
System Programming
Tx Info Menu
Tx Info Menu
Change Tx Address
Selecting Change Tx Address allows users to move a device from one
TX address to another:
TX address to another:
•
Use the arrows to scroll to Change Tx Address and press Enter to
select
select
•
In the next screen, scroll to the address number and press Enter to
select
select
•
Use the up or down arrows to increase or decrease the address
value and press Enter to validate the new address.
value and press Enter to validate the new address.
The Change Tx address option is only available (active) for device
address 1 to 96 and if there is a Modbus device connected.
address 1 to 96 and if there is a Modbus device connected.
If the address is valid, the screen will display “Processing”.
If the address is invalid, the screen will display “Invalid Tx” and return
to the Change Tx Address screen (the address for GasPoint devices
cannot be changed)
to the Change Tx Address screen (the address for GasPoint devices
cannot be changed)
A final screen will display either “Error” or “Success” (re-start procedure
if Error is displayed).
if Error is displayed).
Note: If a device address is changed to one already associated with
another device, the existing data will be overwritten. Customers
should know their network’s address assignments and be careful
when changing a Tx address. Delete the original Tx address to
avoid duplicate entries.This feature is not supported with XNX
and XCD transmitters.
should know their network’s address assignments and be careful
when changing a Tx address. Delete the original Tx address to
avoid duplicate entries.This feature is not supported with XNX
and XCD transmitters.
1. Tx Info
001
erase current Tx
Change Tx Address
Change Tx Address
1. Tx Info
001
To address: 001
1. Tx Info
001
Processing...