CSR v3.2 Manuale Utente

 

 

 
 
 

Combined AV Headset Application 

 

blab-ug-005Pa 

© Cambridge Silicon Radio Limited 2005 

This material is subject to CSR’s non-disclosure agreement. 

Page 13 of 24

 

 

Build the MP3 decoder application by opening the mp3_decode workspace and selecting build in xIDE. The 

mp3_decode

 workspace can be built in exactly the same way as the 

sbc_decode

 workspace in section 5.1 

Step 4. 

Once the 

mp3_decode

 application has been built go back to section 5.1 step 3 and continue with building the 

av_headset_hfp

 application. 

To include CVC (Clear Voice Capture) echo cancellation and noise reduction simply add the define symbol 

INCLUDE_CVC

 to the 

 field before building the 

av_headset_hfp.xiw

 

project. 

Note:   The CVC software is supplied for demonstration purposes only, is time limited and will become inactive after 

processing data for five minutes. 

The ParamMgr Utility can be used to fine tune the CVC code to optimise the performance based on the acoustic 
characteristics of your product. Please see the ParamMgr User guide (CSR reference blab-ug-007Pa). 

The factory settings can be restored using the PSTool application supplied with BlueLab v3.2. 

To restore the factory default settings using PSTool: 
 

1.  Open the PSTool application.  

 
Note: The 

PSTool.exe

 can be found in the BlueLab install directory 

\tools\bin\PSTool.exe

 

 
The Choose transport dialog appears: 
 

2. Select 

 and 

 as the transport settings and click 

.