Manualsbrain.com
  1. Manuali
  2. Marche
  3. CSR
  4. v3.2
  5. Manuale Utente

CSR v3.2 Manuale Utente

Scarica
Pagina di 24
 
 
 
 
 
Combined AV Headset Application 
 
blab-ug-005Pa 
© Cambridge Silicon Radio Limited 2005 
This material is subject to CSR’s non-disclosure agreement. 
Page 8 of 24
 
 
_äìÉi~Ä
»
=îPKO=
Combined A
V Headset U
ser Guide
=
5 
Combined AV Headset Application 
When BlueLab v3.2 has been successfully installed, the Combined AV Headset application can be built and 
executed using the application source code, shipped with BlueLab v3.2.  
This section guides you step-by-step through the process of building and executing this application.  
The application implements the following profiles: 
! 
Headset Profile 
! 
Handsfree Profile 
! 
Advanced Audio Distribution Profile 
! 
Audio/Video Remote Control Profile 
This enables stereo music to be streamed to the headset with the ability to accept and make telephone calls via a 
Bluetooth-enabled mobile phone. 
5.1 
Building the Combined Headset Application 
Step 1: Connect BlueCore3-Multimedia Development Board 
1.  Connect your BlueCore3-Multimedia Development Board to your PC per the instructions supplied with 
the development kit.  
2.  Ensure that you have connected the mini-USB connection and the SPI connection.  
3.  Turn on the board and ensure that the jumpers are configured as shown in Figure 5.1. 
 
Figure 5.1: BlueCore3-Multimedia Development Board 
 
ON 
ON 
ON 
OFF