Jasco 99003 Manuale Utente

8

3.  See the phone’s manual for directions on how to set your 

phone to pair with the headphones. Directions for most phones 
are as follows, however your phone may vary.  

a.  Go to the phone’s options or settings menu–select Bluetooth
b.  Enable phone for Bluetooth operation
c.  Power ON the 99003 headset and enable pairing mode
d.  Search for Bluetooth devices (from the phone)
e.  The 99003 headphones should be listed when the search for 

devices is complete

f.  Go through pairing sequence and connect to the headphones
g.  Enter pass code “0000” if asked
h.  Select “connect to 99003” 

Make sure that your audio source is Bluetooth-enabled or you’ve 
purchased a stand-alone transmitter to make your audio source 
Bluetooth-capable.

1.  Power ON your GE 99003 headphones and activate the 

“Discovery/Pairing Mode” as directed above.

2.  Turn on your Bluetooth-enabled audio source or transmitter. 

They should automatically pair within two minutes if both 
devices are in the “Discovery/Pairing Mode”. 

3.  When pairing is complete, the blue Pairing LED indicator on the 

headset will blink slowly. 

4.  Start the music playback. You should now hear the music 

playing from your transmitter thru the headphones.

5.  If the audio source does not automatically pair to the GE 99003, 

turn off the GE 99003 and the transmitting device, then try 
again. This will cause the GE 99003 and your phone to loose 
their connection.