Sony CDX-GT71W Manuale
11
Tuning automatically
1
Select the band, then press (SEEK) +/–
control up or down to search for the
station.
Scanning stops when the unit receives a
station. Repeat this procedure until the
desired station is received.
control up or down to search for the
station.
Scanning stops when the unit receives a
station. Repeat this procedure until the
desired station is received.
Tip
If you know the frequency of the station you want to
listen to, press and hold (SEEK) +/– control to quickly
locate the approximate frequency, then press (SEEK)
+/– control up or down repeatedly to fine adjust to the
desired frequency (manual tuning).
If you know the frequency of the station you want to
listen to, press and hold (SEEK) +/– control to quickly
locate the approximate frequency, then press (SEEK)
+/– control up or down repeatedly to fine adjust to the
desired frequency (manual tuning).
Receiving a station through a list
— LIST
— LIST
You can list up the frequency.
1
Select the band, then press (LIST).
The frequency appears.
The frequency appears.
2
Rotate the volume control dial until the
desired station appears.
desired station appears.
3
Press (ENTER) to receive the station.
The display returns to normal reception
mode.
The display returns to normal reception
mode.
With the card remote commander
In step 2: press
In step 2: press
M or m instead of the volume control
dial.
Other functions
Changing the sound settings
Adjusting the sound
characteristics
characteristics
1
Press (SOUND).
2
Rotate the volume control dial until the
desired menu item appears, then
press (ENTER).
desired menu item appears, then
press (ENTER).
3
Rotate the volume control dial to
select the setting, then press (ENTER).
The setting is complete.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
select the setting, then press (ENTER).
The setting is complete.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
With the card remote commander
In steps 2 to 3: press
In steps 2 to 3: press
M or m instead of the volume
control dial.
The following items can be set (follow the page
reference for details):
“
reference for details):
“
z
” indicates the default settings.
* When AUX source is activated.
EQ3 parametric
To select an equalizer type: “Xplod,” “Vocal,”
“Edge,” “Cruise,” “Space,” “Gravity,” “Custom”
or “off” (
“Edge,” “Cruise,” “Space,” “Gravity,” “Custom”
or “off” (
z
).
DSO
To select the DSO mode: “1,” “2,” “3” or “off”
(
(
z
). The larger the number, the more enhanced
the effect.
Balance
To adjust the balance between the right and left
speakers: “R10” – “0” (
speakers: “R10” – “0” (
z
) – “L10”
Fader
To adjust the balance between the front and rear
speakers: “F10” – “0” (
speakers: “F10” – “0” (
z
) – “R10”
Subwoofer
To adjust the subwoofer volume: “+10” – “0”
(
(
z
) – “–10”
(“–
∞” is displayed at the lowest setting.)
LPF (Low Pass Filter)
To select the subwoofer cut-off frequency: “off”
(
(
z
), “125Hz” or “78Hz.”
AUX Level*
To adjust the volume level for each connected
auxiliary equipment. This setting negates the
need to adjust the volume level between sources
(page 13).
Adjustable level: “+18 dB” – “0 dB” (
auxiliary equipment. This setting negates the
need to adjust the volume level between sources
(page 13).
Adjustable level: “+18 dB” – “0 dB” (
z
) –
“–8 dB”