Sony 4-427-110-41(1) Manuale Utente
14
The options for “POSITION” are indicated
below.
below.
You can also set the approximate subwoofer
position from your listening position if:
– the audio output is set to “SUB-OUT”
position from your listening position if:
– the audio output is set to “SUB-OUT”
– the listening position is set to other than
“OFF.”
The options for “SET SW POS” are
indicated below.
NEAR
indicated below.
NEAR
(
): Near
NORMAL
(
): Normal
FAR
(
): Far
1
During reception/playback, press
, rotate the control dial until
“SOUND” appears, then press it.
, rotate the control dial until
“SOUND” appears, then press it.
2
Rotate the control dial until
“POSITION” appears, then press it.
“POSITION” appears, then press it.
3
Rotate the control dial until “SET F/R
POS” appears, then press it.
POS” appears, then press it.
4
Rotate the control dial to select from
“FRONT L,” “FRONT R,” “FRONT” or
“ALL,” then press it.
“FRONT L,” “FRONT R,” “FRONT” or
“ALL,” then press it.
5
Rotate the control dial until “SET SW
POS” appears, then press it.
POS” appears, then press it.
6
Rotate the control dial to select the
subwoofer position from “NEAR,”
“NORMAL” or “FAR,” then press it.
subwoofer position from “NEAR,”
“NORMAL” or “FAR,” then press it.
7
Press
(BACK) to return to the
previous display.
To cancel listening position, select “OFF” in
step 4.
step 4.
Adjusting the listening
position
position
You can fine-tune the listening position
setting.
setting.
1
During reception/playback, press
, rotate the control dial until
“SOUND” appears, then press it.
, rotate the control dial until
“SOUND” appears, then press it.
2
Rotate the control dial until
“POSITION” appears, then press it.
“POSITION” appears, then press it.
3
Rotate the control dial until “ADJ
POSITION” appears, then press it.
POSITION” appears, then press it.
4
Rotate the control dial to adjust the
listening position, then press it.
Adjustable range: “+3” – “CENTER” –
“–3.”
listening position, then press it.
Adjustable range: “+3” – “CENTER” –
“–3.”
5
Press
(BACK) to return to the
previous display.
DM+ Advanced
DM+ Advanced improves digitally
compressed sound by restoring high
frequencies lost in the compression process.
compressed sound by restoring high
frequencies lost in the compression process.
1
During playback, press
, rotate
the control dial until “SOUND”
appears, then press it.
appears, then press it.
2
Rotate the control dial until “DM+”
appears, then press it.
appears, then press it.
3
Rotate the control dial to select “ON,”
then press it.
then press it.
4
Press
(BACK) twice.
Tip
The DM+ setting can be memorized for each
source other than the tuner.
source other than the tuner.
FRONT L
(
): Front left
FRONT R
(
): Front right
FRONT
(
): Center front
ALL
(
): In the center of
your car
OFF
OFF
: No position set