Roland CD-2i Manuale Utente
Erasing Tracks from a CD-RW Disc
(continued)
96
You can remove finalization from a CD-RW disc (Page 102) so that the disc can once
again be used for recording. Removing finalization will not erase the recorded tracks.
again be used for recording. Removing finalization will not erase the recorded tracks.
* In order to perform this operation, you’ll need the included, dedicated AC adaptor.
1
Insert the CD-RW disc that you want to edit, and press the [CD] button.
CD becomes the audio source.
2
Press the [MENU] button to access the menu screen, and choose
“Unfinalize?”
“Unfinalize?”
fig.menu-finalize-e.eps
Press the [MENU] button to access the menu screen.
Use the [
] [
] buttons to choose “Unfinalize?”
Press the [ENTER] button to confirm your choice.
3
If you’re sure you want to proceed, press the [ENTER] button.
(If you decide to cancel, press the [EXIT] button.)
fig.finalize-mssg-e.eps
The display will show “Processing..,” and finalization will be removed from the disc.
During this process, a timer is displayed, counting down the time until the operation is
completed.
completed.
When finalization has been removed, you’re returned to the audio source screen.
Removing Finalization
Count-down (min:sec)
You can’t remove finalization from a CD-R disc.
Important
CD-2i_e.book 96 ページ 2010年3月15日 月曜日 午前10時15分