Aiwa CX-NAJ54 Manuale Utente

 21

Refer to the operating instructions of the connected equipment
for details.
• The connecting cords are not supplied. Obtain the necessary

connecting cords.

• Consult your local Aiwa dealer for optional equipment.

This unit can input analog sound signals through these jacks.
Use a cable with RCA phono plugs to connect audio equipment
(turntables, LD players, MD players, VCRs, TV, etc.).
Connect the red plug to the VIDEO/AUX R jack, and the white
plug to the VIDEO/AUX L jack.

When connecting a turntable
 Use an Aiwa turntable equipped with a built-in equalizer amplifier.

This unit can output CD digital sound signals through this jack.
Use an optical cable to connect digital audio equipment (DAT
deck, MD recorder, etc.).
Remove the dust cap a from the CD DIGITAL OUT (OPTICAL)
jack. Then, connect an optical cable plug to the CD DIGITAL
OUT (OPTICAL) jack.

When the CD DIGITAL OUT (OPTICAL) jack is not being
used
Attach the supplied dust cap.

3 JACKS

Connect optional surround speakers with the 8 ohms to 16 ohms
impedance to the jacks.
Be sure to connect both right and left surround speakers to the
jacks to obtain the sound from them.

To play equipment connected to the VIDEO/AUX jacks proceed
as follows.

“VIDEO” appears on the display.

To change a source name in the display
When  VIDEO/AUX is pressed, “VIDEO” is displayed initially. It
can be changed to “VIDEO”, “AUX” or “TV”.
With the power on, press POWER while pressing VIDEO/AUX.
Repeat the procedure to select one of the names.