Hitachi FD2 1590 Manuale Utente

The following warnings are for the setup, use, grounding, maintenance, and repair of this equipment. The exclama-
tion point symbol alerts you to a general warning and the hazard symbol refers to procedure-specific risk. Refer back 
to these warnings. Additional, product-specific warnings may be found throughout the body of this manual where 
applicable.

Flammable fumes, such as solvent and paint fumes, in work area can ignite or explode. To help prevent 
fire and explosion:
•

Use equipment only in well ventilated area.

•

Eliminate all ignition sources; such as pilot lights, cigarettes, portable electric lamps, and plastic drop 
cloths (potential static arc). 

•

Keep work area free of debris, including solvent, rags and gasoline.

•

Do not plug or unplug power cords, or turn power or light switches on or off when flammable fumes 
are present.

•

Ground equipment and conductive objects in work area. See Grounding instructions.

•

Use only grounded hoses.

•

Hold gun firmly to side of grounded pail when triggering into pail.

•

If there is static sparking or you feel a shock, stop operation immediately. Do not use equipment 
until you identify and correct the problem.

Fluid from the gun/dispense valve, leaks, or ruptured components can splash in the eyes or on skin and 
cause serious injury.
•

Follow Pressure Relief Procedure in this manual, when you stop operating and before cleaning, 
checking, or servicing equipment. 

•

Tighten all fluid connections before operating the equipment.

•

Check hoses, tubes, and couplings daily. Replace worn or damaged parts immediately.

Misuse can cause death or serious injury.
•

Do not exceed the maximum working pressure or temperature rating of the lowest rated system com-
ponent. See Technical Data in all equipment manuals.

•

Use fluids and solvents that are compatible with equipment wetted parts. See Technical Data in all 
equipment manuals. Read fluid and solvent manufacturer’s warnings.

•

Check equipment daily. Repair or replace worn or damaged parts immediately with genuine Graco 
replacement parts only.

•

Do not alter or modify equipment.

•

For professional use only.

•

Use equipment only for its intended purpose. Call your Graco distributor for information.

•

Route hoses and cables away from traffic areas, sharp edges, moving parts, and hot surfaces.

•

Do not use hoses to pull equipment.

•

Comply with all applicable safety regulations.

Equipment surfaces and fluids that are heated can become very hot during operation. To avoid severe 
burns, do not touch hot fluid or equipment. Wait until equipment/fluid has cooled completely.