3com 3CRUS2475 Manuale Utente

The remote engineid designates the remote management station and 
should be defined to enable the device to receive informs.

The following example configures an SNMPv3 user John in a group called 
user-group.

The snmp-server engineID local Global Configuration mode command 
specifies the Simple Network Management Protocol (SNMP) engineID on 
the local device. To remove the configured engine ID, use the no form of 
this command.

snmp-server engineID local {engineid-string | default}

no snmp-server engineID local

■

engineid-string—Specifies a character string that identifies the engine 
ID. (Range: 5-32 characters)

■

default—The engine ID is created automatically based on the device 
MAC address.

The engine ID is not configured.

If SNMPv3 is enabled using this command, and the default is specified, 
the default engine ID is defined per standard as:

■

First 4 octets — first bit = 1, the rest is IANA Enterprise number = 674.

■

Fifth octet — set to 3 to indicate the MAC address that follows.

■

Last 6 octets — MAC address of the device.

Global Configuration mode

Console(config)# snmp-server user John user-group