3com 3CRUS2475 Manuale Utente

The clear wlan ap Privileged EXEC mode command deactivates an AP.

clear wlan ap {name | mac-address}

■

name — The AP name. (Range: 1-32 characters)

■

mac-address — The AP MAC address.

This command has no default configuration.

Privileged EXEC mode

■

When the configurations of all the deactivated AP is deleted, the AP 
may reappear in the AP Discovery Table.

■

The clear wlan ap command can also be used to remove an AP that 
is irrelevant (either associated with another device or removed from 
the system) from the APs discovery table. If the AP is still relevant (not 
associated with another device and not removed from the system), it 
should not be removed from the discovery table.

The following example deactivates an AP called enterprise.

Console (config)# clear wlan ap enterprise