3com 3CRUS2475 Manuale Utente
358
C
HAPTER
24: W
IRELESS
AP G
ENERAL
C
OMMANDS
The following example adds VLANs 1,2,3 and 4 to the Ethernet port of a
wireless AP.
wireless AP.
vlan native
The vlan native AP interface Ethernet Configuration mode command
sets the native VLAN of the Ethernet port of a wireless AP. To restore the
default configuration, use the no form of this command.
sets the native VLAN of the Ethernet port of a wireless AP. To restore the
default configuration, use the no form of this command.
Syntax
vlan native vlan-id
no vlan native
Parameters
■
vlan-id — VLAN ID of the native VLAN.
Default Configuration
VLAN #1
Command Mode
AP interface Ethernet Configuration mode
User Guidelines
A VLAN can be defined as a native VLAN only if it is one of the allowed
VLANs.
VLANs.
Example
The following example sets the native VLAN of the Ethernet port for a
wireless AP to 2.
wireless AP to 2.
wlan template ap
configure
configure
The wlan template ap configure Global Configuration mode command
places the device in wireless AP Template Configuration mode.
places the device in wireless AP Template Configuration mode.
Console (Config-ap)# interface ethernet
Console (Config-ap-if)# vlan allowed add 1-4
Console (Config-ap)# interface ethernet
Console (Config-ap-if)# vlan native
2