3com 3CRUS2475 Manuale Utente

BSS Configuration mode

There are no user guidelines for this command.

The following example advertises the BSS SSID. 

The data-rates BSS Configuration mode command configures the data 
rates used in a BSS. To restore defaults, use the no form of this 
command.

data-rates {[mandatory] add | remove} rate1 [rate1…12]

no data-rates

The command can be implemented as follows:

data-rates mandatory add rate1 [rate1…12]

data-rates {add | remove} rate1 [rate1…12]

■

rate-list — Specifies the data rates that should be supported. Available 
rates are as follows:

802.11g — 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48 and 54.

802.11a — 6, 9, 12, 18, 24, 36, 48 and 54.

All rates are optional except for the following rates that are mandatory:

■

802.11g: 1.

■

802.11a: 6.

BSS Configuration mode

Console (Config-ap-radio-if)# bss configure enterprise

Console (Config-ap-bss-if)#