3com 3CRUS2475 Manuale Utente
switchport trunk allowed vlan
459
Parameters
■
vlan-id — Specifies the ID of the VLAN to which the port is configured.
Default Configuration
All ports belong to VLAN 1.
Command Mode
Interface configuration (Ethernet, port-channel) mode
User Guidelines
The command automatically removes the port from the previous VLAN
and adds it to the new VLAN.
and adds it to the new VLAN.
Example
The following example configures a VLAN ID of 23 to the untagged layer
2 VLAN Ethernet port 1.
2 VLAN Ethernet port 1.
switchport trunk
allowed vlan
allowed vlan
The switchport trunk allowed vlan Interface Configuration mode
command adds or removes VLANs to or from a trunk port.
command adds or removes VLANs to or from a trunk port.
Syntax
switchport trunk allowed vlan {add vlan-list | remove vlan-list}
Parameters
■
add vlan-list — List of VLAN IDs to be added. Separate
nonconsecutive VLAN IDs with a comma and no spaces. A hyphen
designates a range of IDs.
nonconsecutive VLAN IDs with a comma and no spaces. A hyphen
designates a range of IDs.
■
remove vlan-list — List of VLAN IDs to be removed. Separate
nonconsecutive VLAN IDs with a comma and no spaces. A hyphen
designates a range of IDs.
nonconsecutive VLAN IDs with a comma and no spaces. A hyphen
designates a range of IDs.
Default Configuration
This command has no default configuration.
Console(config)# interface ethernet 1
Console(config-if)# switchport mode access