3com 3CRUS2475 Manuale Utente
switchport general ingress-filtering disable
463
Example
The following example configures the PVID for Ethernet port 1, when the
interface is in general mode.
interface is in general mode.
switchport general
ingress-filtering
disable
ingress-filtering
disable
The switchport general ingress-filtering disable Interface
Configuration mode command disables port ingress filtering. To restore
the default configuration, use the no form of this command.
Configuration mode command disables port ingress filtering. To restore
the default configuration, use the no form of this command.
Syntax
switchport general ingress-filtering disable
no switchport general ingress-filtering disable
Default Configuration
Ingress filtering is enabled.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example disables port ingress filtering on Ethernet port 1
switchport general
acceptable-frame-ty
pe tagged-only
acceptable-frame-ty
pe tagged-only
The switchport general acceptable-frame-type tagged-only
Interface Configuration mode command discards untagged frames at
ingress. To restore the default configuration, use the no form of this
command.
Interface Configuration mode command discards untagged frames at
ingress. To restore the default configuration, use the no form of this
command.
Console(config)# interface ethernet 1
Console(config-if)# switchport mode general
Console(config-if)# switchport general pvid 234
Console(config)# interface ethernet 1
Console(config-if)# switchport mode general
Console(config-if)# switchport general ingress-filtering disable